STANDARD EQUIPMENT: (All of the following comes with the machine)
Free Freight
• Squaring Arm with inlaid scale, 39” • Bolt on table segments…quantity of 3
• High Carbon, High Chrome Shear Blades • Hold-downs faced w/anti-mar neoprene
• Ball Transfers on Each Table Segment • Swing Beam Design
• Manual Quick Change Blade Gap Adj. • Pressure Sensing Hold Downs
• Squaring Arm, 39” from blade to end • Electric Stroke Adjustment
• Stroke Counter • Operator Control Console
• Front-operated Power Back Gauge with DRO • Shadow Line with LED lighting
• Blade Guard, Micro Switch Protected • Low Noise Gear Pump
• Hydraulic, Electrical Overload Protection • Support Arms Included
• Automatic Swing-up on Back Gauge • 6CrW2Si blades for cutting mild carbon steel
SPECIFICATIONS:
• Sheet Size: 74”
• Shearing Capacity: 1/2” Mild Steel @ 65,000 PSI UTS
1/4” Stainless Steel @ 95,000 PSI UTS
(Must consider option for Cr12MoV blades.)
• Shear Angle: 1 Degree 30’
• No Load Strokes: 12
• Throat Depth: 5.5”
• Adjustment Range of Back Gauge: 0.75” - 36”
• Hydraulic Oil Capacity: 64 Gal.
• Main Motor: 25 HP, 220 or 440 Volts, 3 phase, 70/35 amps
(Please specify your voltage requirement.)
• Net Weight: 19,605 lbs.
• Dimensions (L x W x H): 107” x 80” x 70”
• Squaring Arm with inlaid scale, 39” • Bolt on table segments…quantity of 3
• High Carbon, High Chrome Shear Blades • Hold-downs faced w/anti-mar neoprene
• Ball Transfers on Each Table Segment • Swing Beam Design
• Manual Quick Change Blade Gap Adj. • Pressure Sensing Hold Downs
• Squaring Arm, 39” from blade to end • Electric Stroke Adjustment
• Stroke Counter • Operator Control Console
• Front-operated Power Back Gauge with DRO • Shadow Line with LED lighting
• Blade Guard, Micro Switch Protected • Low Noise Gear Pump
• Hydraulic, Electrical Overload Protection • Support Arms Included
• Automatic Swing-up on Back Gauge • 6CrW2Si blades for cutting mild carbon steel
SPECIFICATIONS:
• Sheet Size: 74”
• Shearing Capacity: 1/2” Mild Steel @ 65,000 PSI UTS
1/4” Stainless Steel @ 95,000 PSI UTS
(Must consider option for Cr12MoV blades.)
• Shear Angle: 1 Degree 30’
• No Load Strokes: 12
• Throat Depth: 5.5”
• Adjustment Range of Back Gauge: 0.75” - 36”
• Hydraulic Oil Capacity: 64 Gal.
• Main Motor: 25 HP, 220 or 440 Volts, 3 phase, 70/35 amps
(Please specify your voltage requirement.)
• Net Weight: 19,605 lbs.
• Dimensions (L x W x H): 107” x 80” x 70”