Powermatic Model 201HH 22" Planer with Helical Head 1PH

  • Sale
  • Regular price $10,899.99
Shipping calculated at checkout.


Available in 7 1/2 HP, 1Ph, 230V (Stock 1791267)
7 1/2 HP, 3Ph, 230V (Stock 1791268)
7 1/2 HP, 3Ph, 460V (Stock 1791268)

This 1300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 150 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments. The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1 /2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements.


Helical cutterhead with knife inserts provides smoother, quieter cutting and finer finish than conventional systems

Cast iron 1300 lb. construction for solid performance without vibration 2 feed speeds - 20/30 fpm - accommodates rough and fine finish work

Segmented infeed roller with sectional chipbreaker allows multiple board planing

Roller bearing-mounted feed rollers for long life

Adjustable bed rollers allow smooth feeding of rough or finished workpieces

Oversized cast iron table travels on 2 large lead screws for heavy duty support

Dust chute with 5" port for dust collection

Standard Equipment:

Dust collection port

Adjustable foot pads

Tool kit



Part Number


Maximum Planing


Maximum Planing Thickness

Maximum Depth of Cut


Minimum Planing Length


Cutterhead Diameter

Cutterhead Speed

4800 RPM

Feed Rate

20 and 30 FPM

Infeed Roller Diameter


Outfeed Roller Diameter


Number of Knives

150 Four-sided inserts

Table Size

32 1/4" x 24"

Dust Port Diameter


Dust Collection Minimum CFM Required

900 cu.ft/min

Blade Size

59/100" x 59/100" x 1/10"

Bed Rollers Adjustable from Front


Segmented Infeed Roller Diameter


Table Height Adjust Manual

1 Turn = 1/16"

Table Support

2 column

Column Diameter

Maximum Height of Rollers Parallel to Tabletop


Number of Speeds


Motor Power

7½ HP

Motor Phase

3 Ph

Model Number




Overall Dimensions

42 x 49 x 59

Height (inch)


Width (inch)


Length (inch)


Net Weight (pound)