Have thicker material to bend? Then look no further than the BB-4810Hhydraulic box and pan brake from Baileigh Industrial. The BB-4810H finger brake will do a maximum of 10 gauge sheet metal at a full 48 inches. This semi-automatic sheet metal brake has 3-3", 2-4", 5-5" and 1-6" fingers that allows any sheet metal fabricator to adjust for different size boxes and pans they wish to make. The BB-4810H box and pan brakes is built with a fully welded beam, bending leaf and is further stabilized with truss rod support that helps minimize any deflection when bending at full capacity.
The BB-4810H hydraulic sheet metal brake uses industrial grade hydraulics to lift the leaf and can be operated in manual or semi-automatic mode. For even more holding power, when bending 10 gauge mild steel, the beam is lifted and clamped via an electric motor that turns a cam. The BB-4810H hydraulic finger brake has a programmable bend adjustment making reproducing bends easy on this hydraulic sheet metal brake.
Another nice feature of the BB-4810H, like all the Baileigh Industrial box and pan brakes, is that the bending apron is removable allowing the operator to get closer between bends. The BB-4810H has a 1” beam adjustment and is capable of bending to a maximum of 135°. Operating on 220V 3 Phase the BB-4810H uses a powerful 3 hp motor to control all the hydraulic functions.
|Min Reverse Bend
||10 ga. (12 ga.)
||0 – 135°
||3" – 4" – 5" – 6"
||220V / 3-phase
||83" x 46" x 69"