Scotchman DO 8514-20M Ironworker
A hydraulic ironworker can be used for punching, shearing, notching, bending and other metal fabrication functions. Scotchman’s special tooling department can design any special tool you need for your metal fabricating needs.
The Scotchman Ironworker is the most used and most versatile machine a person can have in their manufacturing or fabrication shop, maintenance department or vocational school. Ironworkers save time, increase productivity, eliminate waste and create clean smooth cuts and holes.
Scotchman's line of fully integrated hydraulic ironworkers are very popular among fabricators because the punch, flat bar shear, rod shear, rectangle notcher, and the slug-less angle shear are permanently integrated into the machine.
The DO 8514-20M is a Fully Integrated and Dual Operator ironworker, which allows two operators to work at the same time at full capacity. The DO 8514-20M is the most versatile fully integrated style machine in the world, because it is designed to remove the rectangle notcher and replace it with a 90° notcher, extra punch station, press brake, or pipe notcher.
Standard Features
| Dual Operator allows for Two Operators to Work at the Same Time at Full Capacity |
| 85 Ton Punch Station (1-1/16" in 1") |
| Keyed Punch Ram for Safety |
| 14" Throat Depth |
| Punch Gauging Table with Fence and Scale |
| Die Holder Complete with 2" Die Insert for #82 Dies |
| Punch Nut with Wrench |
| Adjustable Swing-Away Stripper |
| One Round Punch & Die: Max. Dia. 1-1/4" |
| Punch Jog Control |
| Two Adjustable Electric Stroke Controls with Scale |
| Two Electric Remote Foot Pedals |
| Two 2-Stage Hydraulic Pumps |
| Two Valves |
| 6" x 6" x 1/2" Slug-less Angle Shear |
| Built-In Rectangle Notcher: 2" x 4" x 1/2" can be converted to 3" x 3" V-Notcher 50-Ton Punch Station 6" Open End Brake |
| 20" Flat Bar Shear (1" x 16", 3/4" x 20") |
| Shear Table with Miter Fence |
| Rod Shear: 1/2", 3/4", 1", 1-1/2" Round and 1-1/2" Square |
| Slug Receptacles |
| Electrical Box Supplied with Emergency Palm Button and Lock-out Tag-out Accommodations |
| 230 or 460 Volt /3 ph Electrics (must specify voltage) |
| All Guards Necesary to Comply with ANSI B 11-5 Standards |
| Forklift Accommodations |
| Warranty: Three Years on Parts |
| Made in USA |
Capacities/Specifications
| Rated on: | 65,000 PSI Tensile | A 36 Mild Steel |
| Punching Capacity | 85 ton 1-1/16" in 1" |
77 mt 27 mm in 25 mm |
| Special Tooling | 4" Max. Dia. | 200 mm Max. |
| Throat Depth | 14" | 350 mm |
| Flat Bar Shear | 20" Length 1" x 16" 3/4" x 20" |
500 mm 25 mm x 400 mm 19 mm x 500 mm |
| Angle Shear 90° | 6" x 6" x 1/2" | 150 mm x 150 mm x 13 mm |
| (45° with Bar Shear) | 4" x 4" x 1/2" | 100 mm x 100 mm x 13 mm |
| Brake 12" | 85 ton | 77 mt |
| Brake 24" | 85 ton | 77 mt |
| Open End Brake | 5" x 5/8" | 125 mm x 16 mm |
| Pipe Notcher Schedule 40 I.D. |
3/4" 1" 1-1/4" 1-1/2" 2" |
19 mm 25 mm 32 mm 38 mm 50 mm |
| 90° V. Notcher (Punch Station) |
6" x 6" x 5/16" | 150 mm x 150 mm x 8 mm |
| Rectangle Notcher | 2" x 4" x 1/2" | 50 mm x 100 mm x 13 mm |
| 90° V. Notcher (Notcher Station) | 3" x 3" x 1/2" | 75 mm x 75 mm x 12 mm |
| Punch Attachment (Notcher Station) Throat Depth w/Punch Attachment |
50 ton 1-1/4" in 1/2" 4-7/16" |
32 mm in 12 mm |
| Channel Shear | 2" to 6" | 50 mm to 150 mm |
| Strut Shear | Samples Required | |
| Rod Shear Round Rod (Max.) Square Rod (Max.) |
1/2" 3/4" 1" 1-1/2" 1-1/2" |
13 mm 19 mm 25 mm 38 mm 38 mm |
| Square Tube Shear | 1/2" 3/4" 1" 16 gauge |
13 mm 19 mm 25 mm 1.6 mm |
| Offset Die Holder | Max. 40 ton | 36 mt |
| Strokes per Minute in Light Material | 1/4" Stroke [Punch Station] | 48 spm |
| Strokes Per Minute in Heavy Material | 3/4" Stroke [Punch Station] | 20 spm |
| Hydraulics | 3,350/3,800 psi | 231/262 bar |
| Motors Standard | 10 hp 3 ph 230/460 208/380/575 |
7.46 kW |
| Motor Optional | 10 hp 1 ph 230v |
7.46 kW |
| Dimensions | W-30" L-70" H-77" |
W-750 cm L-1500 cm H-1925 cm |
| Shipping Weight | 5,504 lbs | 2,496 kg |