|
Scotchman PortaFab 45 Ironworker
Ships at a flat rate $595.00 to any business address with a way to unload
The Porta Fab machine is Scotchman's entry level Ironworker. With 45 tons of hydraulic power in a portable 110V package, this unit is extremely handy because it can be moved around the shop or even taken to a job site. Comes standard with punching station, angle, rod, and bar shears.
•Stations: 4
•Rated Capacity (tons): 45
•Punching Capacity (Std): 1-1/8 inch OD in 1/2 inch plate, 13/32 inch OD in 3/4 inch plate
•Punching Throat Depth (inches): 4.25
•Flat Bar Shearing Max Width (inches): 3/8 x 6
•Flat Bar Shearing Max Thickness (inches): 1/2 x 4
•Angle Shear Max Size 90 Deg (inches): 3 x 3 x 5/16
•Angle Shear Max Size 45 Deg (inches): 2 x 2 x 1/4
•Throat Depth (inches): 4.25
•Special Tooling Max Cap: 2.25
•Pipe Notcher Capacity (inches): 3/4 to 2 inch
•Rectangular Notcher Capacity (inches): 2 x 1.75 x .25
•90 Deg V Notcher Capacity (inches): 6 x 6 x .125
•Rod Angle Combo Capacity (inches): 2 x 2 x 1/4
•Square Tube Shear Capacity (inches): 1/2 to 1
•Picket Tool Capacity (inches): 1/2 to 1
•Cycle Time: 1/4 inch stroke = 20 spm; 3/4 inch stroke = 6 spm
•Motor (Std): 2 hp, 110 volt, 1 phase
•Motor (Opt): 2 hp, 220 volt, 1 phase
•Hydraulics: 2500 psi
•Weight (pounds): 640
•Dimensions (LxWxH): 18 x 36 x 39
- 45 ton punch station: 1-1/8 inch hole in 1/2 inch steel plate
- Keyed punch ram for safety
- 4-1/4 inch throat depth
- 2 inch die holder
- Punch nut with wrench and stripper
- One round punch and die: max diameter 1 inch
- Adjustable electric stroke control with scale
- Three-in-one combination tool: Angle shear capacity: 3 x 3 x 5/16 inch at 90 degrees and 2 x 2 x 1/4 inch at 45 degrees, Bar shear capacity: 3/8 x 6 inch, Rod shear capacity: 3/4 inch round
- Tool table work area
- Machine stand with punch and die and tooling storage rack
- 110 volt/1-ph electrics
- All guards necessary to comply with ANSI B 11-5 standards
- Made in the USA
|
