Item Specs:
Standard Equipment
- Power Double Self-Centering Vise Assures Burr-Free Cuts
- Air-operated Clamp for Material Vise
- Operator Controlled Trigger Switch
- Miter Capabilities 45 Degrees Left and 45 Degrees Right
- Miter Locking Device: Quick, Accurate Settings-Stops at 45 Degrees Left, Straight 90 Degrees, and 45 Degrees Right
- Capable of Slotting
- 5 HP, 3,000 RPM
- Positive Cog Belt Driven
- Chip Drawer
- One Gallon Coolant Tank with Mist Lubrication System
- One 13-1/2" Diameter (338 mm) Carbide-Tipped Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt/3 Phase Electrics (must specify voltage)
Specifications
| Non-Ferrous machines designed for aluminum, plastic, copper, etc. | |
| Cutting Speed | 3,000 rpm |
| Motor Rate | 5.0 HP |
| Factory Wired | 208v/ 230v/ 460 3 ph |
| Maximum Diameter Blade | 14" |
| Arbor Bore | 1-9/16" |
| Pin Spacing | 4/12/64 |
| Width | 21-7/8" |
| Depth | 43-1/2" |
| Height not including handle | 56-1/4" |
| Height from floor to vise | 37-7/16" |
| Shipping Weight | 650 lbs |
| Tubing at 90 Deg | Tubing at 45 Deg | |
| Round | 4-1/2" | 4-1/4" |
| Square | 4-1/4" x 4-1/4" | 4" x 4" |
| Rectangle | 5-1/2" x 4" | 4" x 4" |
| Solid at 90 Deg | Solid at 45 Deg | |
| Round | 3" | 2-1/2" |
| Square | 3" x 3" | 2-1/2" x 2-1/2" |