Features
- Bending speeds 20% faster than competitive machines
- Forged roll shafts precision ground and fitted for maximum performance and minimal deflection
- Heavy duty structure and rigid components for high section modulus
ratings - Patented by Ercolina®; simultaneous downfeed and roll movement to minimize deformation
- Programmable Touch pad controls with digital center roll positioning display
- Universal tooling set included with each machine
- Remote control pendent with low voltage controls and foot pedal switch
- Threaded roll shafts with micrometric flange adjustment helps eliminate spacer usage
- Inline direct drive roll shaft system
- Optional Anti-twist correction system for angle iron leg IN applications
| Dimensions and Specifications | |
|---|---|
| Roll Shaft Diameter | 40mm |
| Center Roll Positioning | Manual with patented torque multiplier |
| Pipe Capacity | 2" Sch.40 |
| Angle Capacity | 2" x 2" x 1/4" |
| Universal Tooling | Included- 6-5/8" O.D. |
| Programming | NA |
| Number of speeds | NA |
| Shaft Speed | 10 RPM |
| Distance between Shafts | 10-5/8" |
| Drive Motor | 1-1/2 HP into planetary |
| Operating Position | Horizontal or Vertical |
| Angle Twist Correction | Optional |
| Foot Pedal Stand | Yes |
| Operating Voltage | **220V or 440V 3 ph |
| Height | 59" |
| Length | 39" |
| Width | 22-1/2" |
| Shipping Weight | 605 lbs. |
*Capacity based on mild steel with machine in "Low bending Speed"
**Single phase machines available
CE40 Angle Roll Capacity Table
| CE 40 | ||||
| Material | Dimensions | Min. Radius |
Wall | Roll Type |
|---|---|---|---|---|
| Pipe | 1/2" 1" 2" |
6" 10" 18" |
.095 .120 .120 |
RT RT RT TI |
| Tube | 1" 1-3/8" 2-3/4" |
6" 8" 24" |
.120 .120 .049 |
RT RT RT TI |
| Square Tube | 13/16" X 13/16" 1-9/16" X 1-9/16" 2" X 2" |
6" 16" 20" |
.086 .083 |
SR SR-TI SR-TI |
| Rectangular Tube "Hard Way" |
1-3/16" X 7/16" 1-9/16" X 13/16" 2" X 1" |
6" 18" 24" |
.065 .095 .095 |
SR SR-TI SR-TI |
| Rectangular Tube "Easy Way" |
1-3/16" X 7/16" 2" X 1" 2-1/2" X 1-3/16" |
6" 20" 32" |
.078 .095 .095 |
SR SR-TI SR-TI |
| Oval Tube "Hard Way" |
1-3/16" X 7/16" 2" X 1" |
8" 24" |
.059 .095 |
SR SR-TI |
| Oval Tube "Easy Way" |
1-3/16" X 7/16" 2" X 1-3/16" |
6" 24" |
.058 .095 |
SR SR-TI |
| Round Solid | 3/4" 1-3/16" |
4" 10" |
NA NA |
RT RT-TI |
| Square Solid | 5/8" 1" 1-3/16" |
4" 8" 10" |
NA NA NA |
RS RS-TI RS-TI |
| Square Solid "Twist" |
5/8" 1-3/16" |
6" 12" |
NA NA |
SR SR-TI |
| Rectangular Solid "Hard Way" |
1-1/2" X 7/16" 2" X 5/16" 2" X 7/16" |
4" 10" 12" |
NA NA NA |
RS RS-TI RS-TI |
| Rectangular Solid "Easy Way" |
1-9/16" X 3/16" 2-1/2" X 5/8" 3-1/8" X 5/8" |
6" 8" 10" |
NA NA NA |
RS RS-TI RS-TI |
| Angle Leg Out | 1" X 1" 1-1/2" X 1-1/2" 2" X 2" |
8" 12" 16" |
.156 .120 .236 |
RS RS RS-TI |
| Angle Leg In | 1-3/16" X 1-3/16" 1" X 1" 2" X 2" |
10" 14" 20" |
.120 .156 .236 |
RS RS RS-TI |
| T Leg Out | 1-3/16" X 1-3/16" 1" X 1" 2" X 2" |
6" 8" 12" |
.120 .156 .236 |
RS RS-TI RS-TI |
| T Leg In | 1-3/16" X 1-3/16" 1-1/2" X 1-1/2" 2" X 2" |
6" 8" 12" |
.120 .156 .236 |
RS RS-TI RS-TI |
| C Leg Out | 1-3/16" X 5/8" 2" X 1-3/16" |
6" 14" |
.155 .236 |
SR SR-TI |
| C Leg In | 1-9/16" X 13/16" 2-1/2" X 1-3/16" |
6" 14" |
.203 .236 |
SR-TI SR-TI |
| C Leg Up | 1-3/16" X 5/8" 2" X 1" |
12" 18" |
.156 | RS RS-TI |
Bending capacities based on mild steel
RS =Standard three roll set /RT =Three-roll tube and solid bar set
SR =Three roll set,special order /TI =Support shafts for rolls