◆ No change gear in tool box. ◆ The thread category complete, not only cutting metric thread and imperial thread, but also cutting diametric thread and module thread. ◆ Minimum Cross feed 0.01mm/rev, Minimum Longitudinal feed 0.046mm/rev.
MODELS
YCL-1440KGY
( = KGY-1440GH )
Swing over bed
360mm(14")
Swing over cross slide
224mm (8-13/16")
Swing in gap diameter
502mm (19-3/4")
length in gap
210mm (8-1/4")
Center height
179mm (7")
Admits between
750mm (30") or 1000mm (40")
Spindle bore
38mm (1-1/2")
Spindle nose
D1-4 or D1-5
Taper in nose
No 5 Morse
Speeds number
8
Speeds range
70-2000 r/min
Cross slide travel
170mm (6-11/16")
Compound rest travel
95mm (3-9/16")
Lead screw thread
8T.P.I. or 3mm pitch
Feed rod diameter
19mm (3/4")
Cutting tool max section
16mm×16mm (5/8"×5/8")
Threads imperial pitches
42 Nos. 4-112T.P.I
Threads metric pitches
44 Nos. 0.1-7mm
Threads diametral pitches
25 Nos. 16-112DP
Threads module pitches
34 Nos. 0.1-1.75MP
Longitudinal feeds imperial
24 Nos. 0.00168-0.1175"/rev
Longitudinal feeds metric
24 Nos. 0.046-3.249 mm/rev
Cross feeds imperial
32 Nos. 0.00046-0.03231"/rev
Cross feeds metric
24 Nos. 0.01-0.703 mm/rev
Quill diameter
32mm(1-1/4") or 42mm (1-21/32")
Quill travel
100mm (3-15/16")
Quill taper
No3 Morse
Main motor power
1.5kW (2HP)
Coolant pump power
40W (1/16HP)
Packing size (cm)
168 ×76 ×153 (750mm) or 193×76×153 (1000mm)
NG/GW (kg)
510/630 (750mm) or 540/645 (1000mm)
Standard Accessories for 14 / 16 KGY
1. Reduction Sleeve 5/3# 2.Center MT3#(Dead Center, Alloy Center) 3. Three Jaw Chuck 160mm
