Features
- 3 HP main motor
- No change gears requires
- 16 speeds from 45-1800 rpm
- D1-4 spindle with 1 1/2 inch bore
- 40 kinds of inch threads from 4-112 tpi
- Removable gaop bed for large diam. work
- Magnetic controls and spindle foot brake
- T-slotted compound and front pull-out chip tray
- Main spindle hardened and precision ground
- Bed made of fine grain high tensile cast iron
- Bedways induction hardened and precision ground
- All gears & shafts hardened and precision ground
- Main spindle supported at 3-point by precision bearings
NOTE: 220V / 1 Phase motors comes only in 8 Speed - 220V / 3 Phase is 16 Speed
Standard Features
- Follow rest
- 12 inch face plate
- 3 3/4 inch steady rest
- 6 inch 3-jaw chuck
- 8 inch 4-jaw chuck
- Operation and parts manual
- Coolant system
- Halogen work light
- Removable gap
- 4-way tool post
- Thread chasing dial
- Front pull-out chip tray
- Centers and reducing sleeve
- Tool kit with tools and leveling pads
- Full length foot brake
- Full length splash guard
- All inch/mm dual dials
- Spindle jog button control
| Specifications | |
|---|---|
| Capacities | |
| Max. swing over bed | 14 inch |
| Distance between centers | 40 inch |
| Max. swing over cross slide | 8 5/8 inch |
| Effective length in gap | 6 1/4 inch |
| Width of bed | 8 1/8 inch |
| Headstock | |
| Spindle nose (spindle mount) | D1-4 |
| Diam. of spindle thru bore | 1 1/2 inch |
| Spindle taper (with sleeve) | M.T. 5 (M.T. 3) |
| Spindle speeds | 45-1800rpm, 16 steps- 45,70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800, rpm (1 phase 90 - 1800 RPM) |
| Feeds & Threads | |
| Longitudinal Feeds | 0.0012-0.0294 inch/ REV. (40 kinds) |
| Cross feeds | 0.0003-0.01 inch Rev. (40 kinds) |
| Inch threads | 4-112 tpi (40 kinds) |
| Metric threads | 0.45-7.5 mm (22 kinds) |
| Diam. of long leadscrew | 7/8 inch |
| Pitch threads of long leadscrew | 8 tpi |
| Carriage | |
| Max. travel of cross slide | 7 inch |
| Max. travel of compound slide | 4 inch |
| Max. tool size | 5/8 x 5/8 inch |
| Tailstock | |
| Diam. of tailstock quill | 2 3/4 inch |
| Taper of tailstock quill center | M.T. 3 |
| Max. travel of tailstock quill | 4 3/4 inch |
| Motors | |
| Power of main motor | 3HP, 220V 3 PH, 2 speed |
| Power of coolant pump | 1/8 HP, 220V, 3 PH |
| Overall Dim. (l x w x h) | 72 x 31 x 49 inch |
| Net weight lbs | 2000 |